产品分类 > 电容 > 铝电解电容 > RS80E821MDNASQJT

可能感兴趣的商品

最近浏览过的商品

pic

RS80E821MDNASQJT

厂商:
Nichicon
类别:
铝电解电容
包装:
Tape & Box (TB)
封装:
Radial, Can
无铅情况/ROHS:
有铅
描述:
CAP ALUM POLY 820UF 2.5V RAD

我要询价我要收藏

  • 参数
  • 描述
参数 数值
安装类型 Through Hole
等效串联电阻 7.0 mOhm
工作温度 -55°C ~ 105°C
容差 ±20%
寿命/温度 5000 Hrs @ 105°C
引线间隔 0.098" (2.50mm)
系列 S8
特点 Polymer
电容容量 820µF
额定电压 2.5V
纹波电流 5.6A
尺寸 0.248" Dia (6.30mm)
高度 0.315" (8.00mm)

特点
Pin Selectable Butterworth or Bessel Response
4mA Supply Current with ±5V Supplies
fCUTOFF up to 20kHz
100μVRMS Wideband Noise
THD <0.02% (50:1, VS = ±7.5V, VIN = 2VRMS)
Operates with a Single 5V Supply (1VRMS Input Range)
60μVRMS Clock Feedthrough (Single 5V Supply)
Operates up to ±8V Supplies
TTL/CMOS-Compatible Clock Input
No External Components
Available in 14-Pin DIP and 16-Pin SO Wide Packages

典型应用

典型应用

描述
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Linear Technology Are Now Obsolete
Low power operation is achieved without compromising noise or distortion performance. With ±5V supplies and 10kHz cutoff frequency, the operating signal-to-noise ratio is 86dB and the THD throughout the passband is 0.015%. Under the same conditions, a 77dB signal-to-noise ratio and distortion is obtained with a single 5V supply while the clock feedthrough is kept below the noise level. The maximum signal-to-noise ratio is 92dB.
The LTC1164-5 approximates an 8th order Butterworth response with a clock-to-cutoff frequency ratio of 100:1 (Pin 10 to V–) or 50:1 double-sampled (Pin 10 to V+ and Pin 1 shorted to Pin 13). Double-sampling allows the input signal frequency to reach the clock frequency before any aliasing occurrence. An 8th order Bessel response can also be approximated with a clock-to-cutoff frequency ratio of 140:1 (Pin 10 to ground). With ±7.5V supply, ±5V supply and single 5V supply, the maximum clock frequency of the LTC1164-5 is 1.5MHz, 1MHz, and 1MHz respectively. The LTC1164-5 is pin-compatible with the LTC1064-2 and LTC-1064-3.
?

请选择文档类型: