产品分类 > 电容 > 钽电容 > F930J156MAA

可能感兴趣的商品

最近浏览过的商品

pic

F930J156MAA

厂商:
Nichicon
类别:
钽电容
包装:
Tape & Reel (TR)
封装:
1206 (3216 Metric)
无铅情况/ROHS:
无铅
描述:
CAP TANT 15UF 6.3V 20% 1206

我要询价我要收藏

  • 参数
  • 描述
参数 数值
系列 F93
类别 Capacitors
电容 15μF
额定电压 6.3V
容差 ±20%
ESR 2.900 Ohm
类型 Molded
工作温度 -55°C ~ 125°C
高度-最大座高 0.071" (1.80mm)
尺寸 0.126" L x 0.063" W (3.20mm x 1.60mm)
引线间隔 -
安装类型 Surface Mount

特点
Pin Selectable Butterworth or Bessel Response
4mA Supply Current with ±5V Supplies
fCUTOFF up to 20kHz
100μVRMS Wideband Noise
THD <0.02% (50:1, VS = ±7.5V, VIN = 2VRMS)
Operates with a Single 5V Supply (1VRMS Input Range)
60μVRMS Clock Feedthrough (Single 5V Supply)
Operates up to ±8V Supplies
TTL/CMOS-Compatible Clock Input
No External Components
Available in 14-Pin DIP and 16-Pin SO Wide Packages

典型应用

典型应用

描述
The H (Metal Can), J (Ceramic), and K (Metal Can) Packages From Linear Technology Are Now Obsolete
Low power operation is achieved without compromising noise or distortion performance. With ±5V supplies and 10kHz cutoff frequency, the operating signal-to-noise ratio is 86dB and the THD throughout the passband is 0.015%. Under the same conditions, a 77dB signal-to-noise ratio and distortion is obtained with a single 5V supply while the clock feedthrough is kept below the noise level. The maximum signal-to-noise ratio is 92dB.
The LTC1164-5 approximates an 8th order Butterworth response with a clock-to-cutoff frequency ratio of 100:1 (Pin 10 to V–) or 50:1 double-sampled (Pin 10 to V+ and Pin 1 shorted to Pin 13). Double-sampling allows the input signal frequency to reach the clock frequency before any aliasing occurrence. An 8th order Bessel response can also be approximated with a clock-to-cutoff frequency ratio of 140:1 (Pin 10 to ground). With ±7.5V supply, ±5V supply and single 5V supply, the maximum clock frequency of the LTC1164-5 is 1.5MHz, 1MHz, and 1MHz respectively. The LTC1164-5 is pin-compatible with the LTC1064-2 and LTC-1064-3.
?

请选择文档类型: