特点
Allows Safe Board Insertion and Removal from a Live Backplane
System Reset and Power Good Control Outputs
Programmable Electronic Circuit Breaker
User Programmable Supply Voltage Power-Up Rate
High Side Driver for Two External N-Channels
Controls Supply Voltages from 3V to 12V
Connection Inputs Detect Board Insertion or Removal
Undervoltage Lockout
Power-On Reset Input
典型应用
描述
A programmable electronic circuit breaker protects agianst shorts. Warning signals indicate that the circuit breaker has tripped, a power failure has occurred or that the switch drivers are turned off. The reset output can be used to generate a system reset when the power cycles or a fault occurs. The two connect inputs can be used with staggered connector pins to indicate board insertion or removal. The power-on reset input can be used to cycle the board power or claer the circuit breaker.
The trip point of the ground sense comparator is set at 0.1V for LTC1421 and 2.5V for LTC1421-2.5.
The LTC1421/LTC1421-2.5 are available in 24-pin SO and SSOP packages.