特点
High Input Impedance Version of the LT5528
Direct Conversion to 1.5GHz - 2.4GHz
High OIP3: 22.8dBm at 2GHz
Low Output Noise Floor at 20MHz Offset:
No RF: -158.2dBm/Hz
P
OUT
= 4dBm: -152.5dBm/Hz
4-Ch W-CDMA ACPR: -64dBc at 2.14GHz
Integrated LO Buffer and LO Quadrature Phase Generator
50Ω AC-Coupled Single-Ended LO and RF Ports
Low Carrier Leakage: -49dBm at 2GHz
High Image Rejection: 40dB at 2GHz
16-Lead QFN 4mm × 4mm Package
典型应用
典型应用
描述
描述 The LT?5518 is a direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation of an RF signal using differential baseband I and Q signals. It supports PHS, GSM, EDGE, TD-SCDMA, CDMA, CDMA2000, W-CDMA and other systems. It may also be configured as an image reject up-converting mixer, by applying 90° phase-shifted signals to the I and Q inputs. The high impedance I/Q baseband inputs consist of voltage-to-current converters that in turn drive double-balanced mixers. The outputs of these mixers are summed and applied to an on-chip RF transformer, which converts the differential mixer signals to a 50Ω single-ended output. The balanced I and Q baseband input ports are intended for DC coupling from a source with a common mode voltage level of about 2.1V. The LO path consists of an LO buffer with single-ended input, and precision quadrature generators that produce the LO drive for the mixers. The supply voltage range is 4.5V to 5.25V.