特点
Slew Rate 7V/μs Typ
Gain-Bandwidth Product: 14MHz Typ
Fast Settling to 0.01%
2V Step to 200μV 900ns Typ
10V Step to 1mV 2.2μs Typ
Excellent DC Precision in All Packages
Input Offset Voltage 275μV Max
Input Offset Voltage Drift 6μV/°
Input Offset Current: 30nA Max
Input Bias Current: 125nA Max
Open-Loop Gain: 1200V/mV Min
Single Supply Operation
Input Voltage Range Includes Ground
Output Swings to Ground While Sinking Current
Low Input Noise Voltage: 12nV/rt Hz Typ
Low Input Noise Current: 0.2pA/rt Hz Typ
Specified on 3.3V, 5V and ±15V
Large Output Drive Current: 20mA Min
Low Supply Current per Amplifier: 1.8mA Max
Dual in 8-Pin DIP and SO8
Quad in 14-Pin DIP and NARROW SO16
Note: For applications requiring higher slew rate, see the LT1213/LT1214 and LT1215/LT1216 data sheets.
典型应用
典型应用
描述
Most H (Metal Can), J (Ceramic), and K (Metal Can) Packages from Linear Technology Are Now Obsolete
Download complete datasheet for Details
The LT?1211 is a dual, single supply precision op amp with a 14MHz gain-bandwidth product and a 7V/μs slew rate. The LT1212 is a quad version of the same amplifier. The DC precision of the LT1211/LT1212 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers.
The LT1211/LT1212 will operate on any supply greater than 2.5V and less than 36V total. These amplifiers are specified on single 3.3V, single 5V and ±15V supplies, and only require 1.3mA of quiescent supply current per amplifier. The inputs can be driven beyond the supplies without damage or phase reversal of the output. The minimum output drive is 20mA, ideal for driving low impedance loads. Note:For applications requiring higher slew rate, see the LT1213/LT1214 and LT1215/LT1216 data sheets.
?